About the product : Polyurethane resin based, with two components, glossy or silky-matt top coat paint.

Properties : Sobsan Polyurethane Top Coat Paint on the basis of polyurethane is resistant to impact, friction, scratches and external influences. Not yellowing, creates a glossy or silky-matt layer on the surface. Easy to apply. It can be used as a paint for the last layer of cellulose, polyurethane or polyester overcoat primers.

Application area : Polyurethane Top Coat Paint safely used in furniture industry, solid wood, coatings and wooden surfaces for decoration and protection.

Surface preparation : Sobsan Polyurethane Top Coat Paint Sobsan Polyurethane Primer applied wooden and coatings surfaces must be dry, remove from grease and dirt. Old layer of paint on the surface, should be sanded and cleared. Sobsan Polyurethane Primer or Sobsan Cellulosic Primere is applied with a two or three-layer coating. After drying primers the surface should be sanded.

Application : 2 units Sobsan Polyurethane Top Coat Paint with 1 unit Sobsan Polyurethane Top Coat Paint Hardener to mix thoroughly. The mixture is diluted with a ratio of 20-25% Sobsan Polyurethane Thinner. Surface, after applying the primer for at least 16 hours Sobsan Polyurethane Top Coat Paint is applied in one or two layers coating using a paint sprayer. Between layers should be wait at least 4 hours.

Consumption : 1 kg. Sobsan Polyurethane Top Coat Paint can be applied one layer on a surface of 8- 10m ².

Storage : Stored non-falling direct sunlight in unopened original containers for up to 1 years at 5-35°C ambient temperature. Protect from excessive heat and moisture.

Safety :

S 2             : Keep out of the reach of children.

S 3 / 7 / 9   : Keep container tightly closed in a cool, well-ventilated place.

S 16           : Keep away from sources of ignition - No smoking!

S 24 / 25    : Avoid contact with skin and eye.

S 29           : Do not empty into drains.

S 46           : If swallowed, seek medical advice immediately and show this container or label.

S 51           : Use only in well-ventilated areas.

Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !