About the product : Based on acrylic copolymer emulsion, high quality, very flexible, water-basis waterproof plastic coating.
Properties : Perfectly adheres to the surface. Its elastic composition in hot and cold weather conditions does not lose elasticity. With the ability to breathe from the walls repels moisture. Chemical and UV rays resistance is high. Waterproof.
Application area : It is used in buildings where water and moisture resistance is required, in concrete, plaster, brick, wooden and in flat, corrugated roofing, in terraces and roofs.
Application : Before using the Sutut, the surfaces must be completely cleaned of grease, dust, and small particles of a substance that prevents sticking. Once the surface is ready, Sutut dilute 40% with water and apply 1 layer as a primer. As soon as the primer is dry, Sutut should be used without diluting and coat 2-3 layers, each layer should be applied opposite to the previous layer. Between coats, wait at least 24 hours. Surfaces after applying Sutut must be protected from rain, snow and freeze for 24 hours. The temperature during use should be between + 5ºC to + 35ºC. Do not use below + 5ºC temperatures. Surfaces subjected to impact should be covered with a protective coating.
Consumption : 1 kg of Sutut can be applied on one layer depending on the surface of 14 m².
Storage : Stored non-falling direct sunlight in closed original containers for up to 3 years at 5-35 °C. It should be protected from excessive heat and freezing.
Safety :
S 2 : Keep out of the reach of children.
S 3 / 7 : Keep container tightly closed in a cool place.
S 24 / 25 : Avoid contact with skin and eye.
S 29 : Do not empty into drains.
S 46 : If swallowed, seek medical advice immediately and show this container or label.
Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !