About the product : Acrylic copolymer emulsion based decorative paint for exterior surfaces.
Properties : Fits perfectly on the surface. Does not crack does not fall. Resistant to the damaging effects of rain moisture sunlight and sea moisture. The ability to pass air allows to “breathe” the surfaces and prevents the formation of dampness. Does not fade.
Application area : Used to cover all types of exterior surfaces and can be applied on concrete, plaster, gas-concrete, asbestos-cement, new and old surfaces whith suitable primer. If necessary it can be used indoor parts of buildings.
Application : All surfaces must be sound, clean, dry and free from substances preventing adhesion before applying Rulotex. Wait for 21 days (at 20° C) for newly plastering surfaces until completely dry. After drying prime with Sobbinder or Sobsilexprim and then apply Rulotex. If necessary use Sobexpasfilling putty to straighten up hole and cracks on the surface. Rulotex is ready to use. It is applied with a roller and compressor. If necessary, it can be diluted 1.5-2% with water.
Consumption : 1 kg of Rulotex with a compressor can be applied one coat depending on a surface of 1 m². With the roller Rulotex 800 gr can be covered one layer of 1 m².
Storage : Stored non-falling direct sunlight in closed original containers for up to 3 years at 5-35 °C. Keep away from excessive heat and moisture.
Safety :
S 2 : Keep out of the reach of children.
S 3 / 7 : Keep container tightly closed in a cool place.
S 24 / 25 : Avoid contact with skin and eye.
S 29 : Do not empty into drains.
S 46 : If swallowed, seek medical advice immediately and show this container or label.
Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !
*4545
Sign In
Water based paints
.jpg)
Solvent based paints
Gold Series
.jpg)
Water based varnishs
