About the product : Decorative white colour plaster mix based on cement and marble stone with chemical additives, easy to prepare and apply, one-component, creates a decorative surface in the interior and exterior.

Properties : Resistant to fluctuations in weather conditions and does not absorb water.

Provides a natural and decorative appearance in buildings.

It is an ideal decorative facade covering for insulation and insulation systems made on the basis of cement and marble stone of a special size.

On the basis of marble stone of a special size with decorative lining covers surface defects.

It can be applied dyes of any color.

Absolutely not burn due to the basics of natural marble stone.

Application area : When coating a thin primer, coarse primer, concrete, aerated concrete, silicate and acrylic paints

When covering XPS (Extrusion Poly Styrene), EPS (Expand Poly Styrene), stone wool (pressed mineral wool) such as heating and sound insulation plates.

Application : The mix is applied to the surface with the flat side of a metal spatula. Then, using a plastic spatula, depending on the type of the decoration is polished with circular or one-sided for finishing the surface decorative look. During polishing, the surface of the plastic spatula should often be cleaned. The thickness during use is selected based on the size of the largest grains. Ready mix should be used depending on weather conditions for 2 hours.

Consumption : 3 kg/m2

Storage : Store tightly closed bags and in dry weather conditions on wooden pallets, stacking each other  10 bags up to 12 months.

Safety : 

S 2            : Keep out of the reach of children.

S 28           : After contact with skin, wash immediately with plenty of water.

S 36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.

Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !