Product description : SOBAF 660 is a tin free antifouling paint with self polishing action in service and long protection against marine oganisms. The specific vehicle composition provides an advanced fusion technology during operation, resulting in long lasting antifouling performance. IMO Anti-fouling System convention compliant (AFS/CONF/26).

Recommended use : Antifouling paint on steel ship's bottom for world wide service with extended dry-docking interval.

Surface preparation : All surface contamination such as dirt, grease, oil, etc. must be removed. To be used over suitable existing antifoulings and primers. Close high pressure fresh water washing to 250 bar (3500 psi) to remove contamination and any leached layers from existing antifouling.

Packing : One pack product

Safety information: Personal Protection advice and additional information can be obtained from the product Health and Safety Data Sheet which is available on request. The minimum safety precautions in dealing with this paint are:

1. Observe the precautionary notices displayed on the container. 
2. Provide adequate ventilation. 
3. Avoid skin contact and inhalation of spray mist. 
4. If the product comes into contact with the skin, wash thoroughly with luke warm water and soap or suitable  cleaner. If the eyes are contaminated, irrigate with water and seek medical advice immediately.
5. Since the product contains flammable materials, keep away from sparks and open flames. No smoking should be permitted in the area.

Note : The manufacturer company is not responsible for any defects or results if the instructions for use and storage of products are not followed !