Double component, polyurethane based, matte and final layer applied to paint. Polyurethane final layer applied to silk matte white paint creates solid and matte surface. Creates extraordinary rich appearance. Durable for scratching, blowing, sulling and domestic chemicals.
Polyurethane final layer applied to silk matte white paint is a paint used in furniture industry in manufacture of any hard and MDF covers and applied to final layer.
- Surface preparation: before application, wooden surfaces should be made free from dust before corresponding polishing process.
- Mixture coefficient (on heaviness):
Sobsan Polyurethane final layer applied to silk matte white paint: 2 units / Sobsan Polyurethane final layer applied to silk matte white fastening. 1 unit
Varnish applied surface:
- Application form: After combining within the appointed percentage Polyurethane final layer applied to silk matte white is preparing through dilution with Polyurethane decisive (15-25%). One/two cross layer surfaces made from polyurethane, polyether or acrylic covers. If required one more layer may be applied 15-20 minutes later. Product, left to get dry in dustless atmosphere, creates smooth and slippery surface.
If applied to form45-50 µ dry layer density in one layer, 8-10 m2
should be covered through 1 liter.
Drying period (20°C):
Drying period to touch: 1.5-2 hours, to avoid dust absorption - period: 50-60 minutes, Complete drying period: 24 hours.
May be stored at 5-35°C, kept free from ultraviolet rays in unopened original package within 1 year. To be preserved from over heat and humidity.
Mix before application of Polyurethane final layer applied to silk matte white. Use of product is not possible after expiry date end, thus to avoid materials waste mixture coefficient should be taken into account and small mixtures should be prepared. Environmental temperature due to application should be 5-35°C.
After each application tools should be cleaned with Polyurethane dissolvent. Polyurethane final layer applied to matte white applied surfaces should be kept physical and chemical impact within 24 hours.
Polyurethane tamping varnish should not be thrown into sewerage and water canals. Application should be carried out above mentioned ways.
R20/21/22: dangerous for health while breathing, skin contact and deglutition
R36: Irritate eyes.
S2:Keep away from children
S3/7/9: Keep the package in closed, cool and well-ventilated areas.
S16: Keep away from fires, no smoking.
S24/25: Keep away from eyes and skin.
S29:Don’t throw to sewerage.
S46:When swallowed ask to the doctor, show package and etiquette
S51:Use only in well-ventilated areas.