POLYURETHANE MATTE WHITE PAINT

Description: Double component, polyurethane based, matte and final layer applied to paint. Sobsan Polyurethane final layer applied to matte white paint creates solid and matte surface. Creates extraordinary rich appearance. Durable for scratching, blowing, sulling and domestic chemicals. Characteristics: Sobsan Polyurethane final layer applied to matte white paint used in furniture industry in manufacture of any kind of hard and MDF covers and applied to final layer. Polyurethane is easily applied on polyether and acrylic covers. Use form: 1. Surface preparation: before application, wooden surfaces should be made free from dust before corresponding polishing process. 2. Mixture coefficient (on heaviness): Sobsan Polyurethane final layer applied to matte white paint: 2 units / Sobsan Polyurethane final layer applied to matte white fastening. 1 unit 3. Application form: After combining within the appointed percentage Sobsan Polyurethane final layer applied to matte white paint is preparing through dilution with Sobsan Polyurethane decisive (15-25%). One/two cross layer surfaces made from polyurethane, polyether or acrylic covers. If required one more layer may be applied 15-20 minutes later. Product, left to get dry in dustless atmosphere, creates smooth and slippery surface. Varnish applied surface: if applied to form 45-50 µ dry layer density in one layer, 8-10 m2 should be covered through 1 liter. Drying period (20°C): Touch dry: 1.5-2 hours, to avoid dust absorption - period: 50-60 minutes, Complete drying period: 24 hour. Glittering point: <21°C Storage: may be stored at 5-35°C, kept free from ultraviolet rays in unopened original package within 1 year. To be preserved from over heat and humidity. Warning: Mix before application of Polyurethane final layer applied to matte white paint. Use of product is not possible after expiry date end, thus to avoid materials waste mixture coefficient should be taken into account and small mixtures should be prepared. Environmental temperature due to application should be 5-35°C. After each application tools should be cleaned with Sobsan polyurethane dissolvent. Polyurethane final layer applied to matte white paint surfaces should be kept physical and chemical impact within 24 hours. This paint should not be thrown into sewerage and water canals. Application should be carried out above mentioned ways. Danger warnings: R11: Highly inflammable R20/21/22: dangerous for health while breathing, skin contact and deglutition R36: Irritate eyes. Safety warnings: S2: Keep away from children. S3/7/9: Keep the package in closed, cool and well-ventilated areas. S16: Keep away from fires, no smoking. S24/25: Keep away from eyes and skin. S29: Don’t throw to sewerage. S46: When swallowed ask to the doctor, show package and etiquette S51: Use only in well-ventilated areas.